Verify · check · batch read - matched to your line中文RUJAKOARFRESDEHIPT
XTS03-2 · Desktop form · Fixed bench · includes industrial reader

XTS03-2 Desktop form: Fixed bench · includes industrial reader

Built on XTS03-1 with an XT8601B industrial reader added: more confidence with reflective surfaces, small codes, and awkward angles. Start here for fixed stations with complex product shapes.

Configuration & specifications

From the current datasheets; the shipping datasheet governs.

ItemContent
ModelXTS03-2
FormDesktop (wireless scanner + industrial reader)
Standard packageScan-to-verify software ×1; XT802F-X86 industrial PC ×1; VESA bracket ×1; XT6202HD RS232 wireless scanner ×1; XT8601B industrial reader; industrial bracket ×1
OptionsWired scanner XT6201HD; reader upgrade to XT9202B
CustomizationBuild-to-order supported
Warranty12 months (per the warranty service agreement), 5×8-hour technical support

Key functions

Pre-loaded comparison

Load the barcodes that should pass into the database first. During production, each scanned code is compared with the pre-loaded list: match = pass, mismatch = NG.

OK / NG dual-channel alerts

An external horn plus the industrial PC report OK with a green light; codes not on the list or duplicate scans trigger an NG warning tone, a red light, and an NG signal output.

NG signal linked to the line

The NG signal output can be wired to line-stop or reject mechanisms so defective items do not move downstream.

Three scan modes

Single-product scanning, batch out-of-order scanning, and batch full-pallet scanning, switched to match the workstation rhythm.

Data logging

Scan records can be exported to spreadsheets; full-case scanning supports automatic binding of product codes to case codes.

Where it fits - and where it doesn't

Choose it for these

  • Complex code surfaces: reflective film, curved surfaces, small labels
  • Fixed verification stations mixing manual scans and auto reads
  • Verification rhythm slightly faster than pure manual scanning

Consider another for these

  • Pure inline passing (use XTS03-3)
  • Mobile operation (use XTS03-1B)
XTS03-2 desktop form
XTS03-2: industrial PC + industrial reader fixed verification
XTS03-2 in the field
XTS03-2 bench workstation

Applications

Fixed verification stations in food, pharma, daily chemicals, 3C, lighting, and hardware.

FAQ

How do I set the comparison rules?

Pre-load the barcodes that are allowed to pass into the database, then compare scans against that list during production. Per the datasheet: barcode-length comparison, quantity matching, and database duplicate checks are supported (the XTS11 software adds up to 100 conditional rules; XTS03 capabilities are confirmed in a live demo).

Can it connect to our MES?

The system supports serial port, TCP Server / TCP Client, Http/Https, and MES data output (explicitly listed in the XTS11 datasheets). Default configurations for each XTS03 variant follow the datasheets; confirm the integration method with an engineer before ordering.

What happens when a scan fails?

On NG (code not on the pre-loaded list, duplicate scan, etc.) the system sounds a warning tone with a red light and outputs an NG signal; lines wired to line-stop or reject mechanisms act automatically, while others rely on the audible and visual alert for manual handling.

Describe your line, and the configuration follows

Where you scan, what code, how fast the takt, where results go - state these four things and our engineers will configure the system directly.