Verify · check · batch read - matched to your line中文RUJAKOARFRESDEHIPT
XTS03-1 · Handheld scanner form · Fixed bench workstation

XTS03-1 Handheld scanner form: Fixed bench workstation

A desktop manual verification station: the operator places each product at the bench and scans it; the software compares against the pre-loaded list - OK gets a green light, NG sounds a warning and outputs a signal. Suited to small-batch assembly and rework checks where a person watches every item.

Configuration & specifications

From the current datasheets; the shipping datasheet governs.

ItemContent
ModelXTS03-1
FormDesktop manual scanning
Standard packageScan-to-verify software ×1; XT802F-X86 industrial PC ×1; VESA bracket ×1; XT6202HD RS232 wireless scanners ×2
OptionsWired scanners: XT6201HD, XT8131A
CustomizationBuild-to-order supported
Warranty12 months (per the warranty service agreement), 5×8-hour technical support

Key functions

Pre-loaded comparison

Load the barcodes that should pass into the database first. During production, each scanned code is compared with the pre-loaded list: match = pass, mismatch = NG.

OK / NG dual-channel alerts

An external horn plus the industrial PC report OK with a green light; codes not on the list or duplicate scans trigger an NG warning tone, a red light, and an NG signal output.

NG signal linked to the line

The NG signal output can be wired to line-stop or reject mechanisms so defective items do not move downstream.

Three scan modes

Single-product scanning, batch out-of-order scanning, and batch full-pallet scanning, switched to match the workstation rhythm.

Data logging

Scan records can be exported to spreadsheets; full-case scanning supports automatic binding of product codes to case codes.

Where it fits - and where it doesn't

Choose it for these

  • Fixed bench workstation with item-by-item manual verification
  • Small-batch, high-variety, frequently changeover assembly benches
  • Rework re-checks: confirm reworked items pass before release
  • Bench has room for an industrial PC and bracket

Consider another for these

  • Continuous inline passing where manual scanning cannot keep up (use inline XTS03-3)
  • Whole-pallet or whole-case passing in one go (use XTS11-2 or scan gate XTS03-5)
  • Stations that move or change lines often (use mobile XTS03-1B)
XTS03-1 desktop manual scan-to-verify system
XTS03-1: industrial PC + dual wireless scanners for bench verification
XTS03-1 in the field
Bench verification at a packing workstation

Applications

Assembly and rework stations in food, pharma, daily chemicals, 3C, lighting, and hardware.

FAQ

Why two wireless scanners in the standard package?

The datasheet lists XT6202HD RS232 ×2 as standard: two operators side by side, or one feed lane on each side, without passing products back and forth. One scanner also works - decide by actual headcount at the station.

How do I set the comparison rules?

Pre-load the barcodes that are allowed to pass into the database, then compare scans against that list during production. Per the datasheet: barcode-length comparison, quantity matching, and database duplicate checks are supported (the XTS11 software adds up to 100 conditional rules; XTS03 capabilities are confirmed in a live demo).

Can it connect to our MES?

The system supports serial port, TCP Server / TCP Client, Http/Https, and MES data output (explicitly listed in the XTS11 datasheets). Default configurations for each XTS03 variant follow the datasheets; confirm the integration method with an engineer before ordering.

What happens when a scan fails?

On NG (code not on the pre-loaded list, duplicate scan, etc.) the system sounds a warning tone with a red light and outputs an NG signal; lines wired to line-stop or reject mechanisms act automatically, while others rely on the audible and visual alert for manual handling.

Describe your line, and the configuration follows

Where you scan, what code, how fast the takt, where results go - state these four things and our engineers will configure the system directly.