Verify · check · batch read - matched to your line中文RUJAKOARFRESDEHIPT
XT-S09 · Barcode Uniqueness Comparison System · Mix-up prevention · barcode string comparison

XT-S09 Barcode Uniqueness Comparison System: Mix-up prevention · barcode string comparison

Preset the scan condition, and a scanned barcode string must match it to pass: for example, every product barcode must start with A - anything without A is blocked. Supports dynamic and static, single and full-case scanning; built to stop mix-ups of products that look alike but carry different codes.

Configuration & specifications

From the current datasheets; the shipping datasheet governs.

ItemContent
Complete-unit modelXT-S0913B (marked on the official main image)
Comparison methodBarcode string comparison against preset scan conditions; pass only on match
Scan modesDynamic / static scanning; single / full-case scanning
Alerts & linkagePass releases the item; fail blocks it (can work with rejection devices, customized per site)
Error-prevention goalPrevents mix-ups of products that look alike
NoteBuild-to-order supported; this page lists no parameters beyond the datasheet - the current datasheet governs before ordering

Key functions

Preset-condition comparison

Pass conditions set by barcode string (prefix, content, etc.); release only on match.

Dynamic / static dual use

Dynamic scanning on the line, static at the bench - one rule set.

Single / full case

Both single-item verification and full-case scanning, so case checks need no second device.

Mix-up prevention

Look-alike products with different codes are separated by barcode comparison, preventing wrong assembly and wrong shipment.

Where it fits - and where it doesn't

Choose it for these

  • Hardware machining, CNC, precision instrument and precision tool shops
  • Auto parts, battery, chip, and module production lines
  • Look-alike products sharing a line where mix-ups are likely
  • Barcode-based order conformity checks before delivery

Consider another for these

  • Sequence-ordered process verification (use XTS10 production process verification)
  • Full-pallet batch read comparison (use XTS11-2)
XT-S09 barcode uniqueness comparison system
XT-S09: industrial scanner + display comparison station

Applications

Hardware machining, CNC, precision instruments, precision tools, auto parts, batteries, chips, and modules.

FAQ

How is it different from the XTS03 scan-to-verify system?

XTS03 targets line verification with case binding as a complete hardware-software set; XT-S09 focuses on barcode string comparison against mix-ups with simpler, more direct rules. Both support build-to-order - choose by whether you need mix-up prevention or full-flow verification.

What preset conditions can be configured?

Pass rules are set by barcode content, for example 'every product barcode must start with A'. Confirm the exact rule form for your code system during selection.

What happens when a code without A is scanned?

No match means no release: the device gives a fail indication. If automatic rejection or line-stop is needed, state it during customization so it works with the line's mechanisms.

Describe your line, and the configuration follows

Where you scan, what code, how fast the takt, where results go - state these four things and our engineers will configure the system directly.