XTS10 Production Process Verification System: Scan by process step · skipped-step alarms
Every process step on the line scans in the preset order: a missed or skipped step alarms immediately and does not release until corrected. Steps can be timed - unfinished at the deadline counts as overtime. It keeps problems like 'entering the next step before finishing the previous one' inside the line.
Configuration & specifications
From the current datasheets; the shipping datasheet governs.
| Item | Content |
|---|---|
| Model | XTS10 |
| Verification logic | Scan by preset process order; missed or skipped steps alarm audio-visually until corrected |
| Step timing | Steps can be timed; unfinished at the deadline is judged overtime |
| Main components | Industrial panel PC + software + industrial scanners + industrial wireless scan guns, etc. |
| Software interface | In-order scanning, wrong-order reminders, rework management, statistics |
| Note | Build-to-order supported; this page lists no parameters beyond the datasheet - the current datasheet governs before ordering |
Key functions
In-order scanning
One scan point per process step; products scan through in order while the system checks the sequence.
Missed/skip alarms
A missed or skipped step alarms immediately and blocks continuation until corrected - errors never carry to the next step.
Step timing
Set a time per step; unfinished at the deadline counts as overtime, giving takt data you can audit.
Rework management
Rework items follow a separate rework flow and records, never mixed with normal flow.
Statistics
Process scan records aggregate into statistics for scheduling and traceability.
Where it fits - and where it doesn't
Choose it for these
- 3C and electronics product manufacturing
- Hardware machining, CNC, precision instruments, precision tools
- Auto parts, battery, chip, and module lines
- Shops with many steps where misses and skips must be caught and traced
Consider another for these
- Only mix-up prevention without process order control (use XT-S09)
- Pallet inbound/outbound batch verification (use XTS11-2)
Field and detail views
Official product photos; click-through images, no zoom tricks.



Applications
3C manufacturing, electronics, hardware machining, CNC, precision instruments and tools, auto parts, batteries, chips, modules.
FAQ
How are process orders preset?
Set the sequence in the software according to the actual line steps; products scan at each step and the system verifies order. Setup details are covered in software training.
How is an alarm cleared?
Missed/skipped-step alarms hold until corrected: complete the missing step or process through the rework flow, then scan again - per the site's agreed procedure.
Can it work alongside XTS03?
The two systems have different software roles: XTS03 handles barcode comparison and case binding, XTS10 handles process order. They can coexist in one shop - describe both needs during selection for a combined proposal.
Can it connect to our MES?
The system supports serial port, TCP Server / TCP Client, Http/Https, and MES data output (explicitly listed in the XTS11 datasheets). Default configurations for each XTS03 variant follow the datasheets; confirm the integration method with an engineer before ordering.
What happens when a scan fails?
On NG (code not on the pre-loaded list, duplicate scan, etc.) the system sounds a warning tone with a red light and outputs an NG signal; lines wired to line-stop or reject mechanisms act automatically, while others rely on the audible and visual alert for manual handling.
Related systems
They differ in scan position and batch size - open and compare.
Describe your line, and the configuration follows
Where you scan, what code, how fast the takt, where results go - state these four things and our engineers will configure the system directly.

