Verify · check · batch read - matched to your line中文RUJAKOARFRESDEHIPT
XTS03-4 · Scan cart form · Whole-cart mobility · multi-reader stitching

XTS03-4 Scan cart form: Whole-cart mobility · multi-reader stitching

Industrial PC, junction box, and industrial readers mounted as one cart: when large items cannot easily move to a fixed station, push the cart to them. Readers can be stitched across multiple units to cover large products in one read.

Configuration & specifications

From the current datasheets; the shipping datasheet governs.

ItemContent
ModelXTS03-4
FormMobile scan cart
Standard packageScan-to-verify software ×1; XT802F-X86 industrial PC ×1; cart bracket ×1; junction box ×1; XT8601B industrial reader ×1; XT8161 ×1
OptionsIndustrial reader XT9202B; multi-reader field-of-view stitching; line-stop controller, reject controller
CustomizationBuild-to-order supported
Warranty12 months (per the warranty service agreement), 5×8-hour technical support

Key functions

Pre-loaded comparison

Load the barcodes that should pass into the database first. During production, each scanned code is compared with the pre-loaded list: match = pass, mismatch = NG.

OK / NG dual-channel alerts

An external horn plus the industrial PC report OK with a green light; codes not on the list or duplicate scans trigger an NG warning tone, a red light, and an NG signal output.

NG signal linked to the line

The NG signal output can be wired to line-stop or reject mechanisms so defective items do not move downstream.

Three scan modes

Single-product scanning, batch out-of-order scanning, and batch full-pallet scanning, switched to match the workstation rhythm.

Data logging

Scan records can be exported to spreadsheets; full-case scanning supports automatic binding of product codes to case codes.

Where it fits - and where it doesn't

Choose it for these

  • Large or heavy items that cannot easily move to a fixed station
  • One verification set shared across several stations in a shop
  • Products too large for a single reader's field of view

Consider another for these

  • Fixed-line continuous passing (use XTS03-3)
  • Small high-frequency stations (desktop is handier)
XTS03-4 scan cart form
XTS03-4: industrial PC + junction box + readers as one mobile cart
XTS03-4A/B
XTS03-4A and 4B cart models

Applications

Large-item assembly and multi-station shops: hardware, auto parts, 3C, lighting.

FAQ

How do I set the comparison rules?

Pre-load the barcodes that are allowed to pass into the database, then compare scans against that list during production. Per the datasheet: barcode-length comparison, quantity matching, and database duplicate checks are supported (the XTS11 software adds up to 100 conditional rules; XTS03 capabilities are confirmed in a live demo).

Can it connect to our MES?

The system supports serial port, TCP Server / TCP Client, Http/Https, and MES data output (explicitly listed in the XTS11 datasheets). Default configurations for each XTS03 variant follow the datasheets; confirm the integration method with an engineer before ordering.

What happens when a scan fails?

On NG (code not on the pre-loaded list, duplicate scan, etc.) the system sounds a warning tone with a red light and outputs an NG signal; lines wired to line-stop or reject mechanisms act automatically, while others rely on the audible and visual alert for manual handling.

Describe your line, and the configuration follows

Where you scan, what code, how fast the takt, where results go - state these four things and our engineers will configure the system directly.